Here are some SD card recommendations for the GoPro HERO (2018) camera.
GoPro now has two cameras called the GoPro HERO. The first was released in 2014. If you’re looking for memory card recommendations for that camera, you can find some here.
This post refers to the new version of the GoPro HERO, which was released in early 2018. You can also sometimes see it listed as the GoPro HERO (2018). The memory card recommendations for the cameras aren’t the same, especially because the old version couldn’t take memory cards larger than 32GB. That limitation doesn’t apply to the new version.
Not every microSD memory card will work well in the GoPro HERO (2018). It doesn’t have the 4K or high-framerate video modes of the HERO6 Black or HERO5 Black, but it still records at quite a high bitrate (more specifics on that below). So it’s still very much possible to end up with a card that’s too slow, which can cause video recording to stop unexpectedly, prompt an error message, or the camera can lock up (or perhaps all of those at once). So you don’t necessarily want to be throwing just any old SD card in there and hoping for the best.
If you just want to cut to the chase, here are some quick recommendations for an SD card to use in GoPro HERO:
These are fast and reliable, cost-effective, and readily available. Any of these make a good choice. If you’d like more detailed recommendations or other brands and models, you can find them below. I also have a more general guide to the best SD card for GoPro cameras.
This is not designed to be a comprehensive list of every card that works with the GoPro HERO (2018). What I’m trying to do is present some options so you can choose a card and be confident that it’s compatible. There are other cards that also work well; I’ll update this list as I have a chance to test them or as new models come out. There are also other fast cards that simply aren’t easy to find or aren’t cost-effective when you do; I’m most interested in ones that are readily available and reasonably priced.
Fast, cost-effective, reliable, and widely available, the SanDisk Extreme range is a safe bet for using in any of the recent GoPros. It's the card that GoPro itself often bundles with its cameras. It's also the memory card that they officially endorse in their Works with GoPro program.
It comes in 32GB, 64GB, and 128GB sizes. (There's a 265GB version marketed under model number SDSQXAO-256G-AN6MA in North America).
Samsung makes several excellent microSD cards. The EVO Select is one of their better cards, offers good value, and is plenty fast enough for the GoPro HERO (2018).
It's available in 32GB, 64GB, and 128GB sizes.
Buy at: Amazon
While slower than the 1000x Lexar cards (which are also listed, below), these also work well and are a good cost-effective option. It's a card that has now been available for quite some time and they're typically very reasonably priced--sometimes in multi-packs. One of the other appeals of this range is that there's an unusually wide choice of sizes: 256GB, 200GB, 128GB, 64GB, 32GB, and 16GB.
It comes with *either* a microSD to SD adapter cartridge *or* a USB 3.0 thumb reader, so make sure you're getting the version you want. You can also find multi-packs.
This one is faster than Lexar's 633x line. You won't get any benefit in the camera (possible some when downloading to a computer), but being newer they might become easier to find in stores. It comes in 32GB, 64GB, and 128GB versions.
The Extreme Pro line is SanDisk's top-of-the-range line. It's faster and fancier than the HERO needs--the regular Extreme and Extreme Plus cards work just as well in the camera, but the Extreme Pro also works well.
It comes with a very fast USB thumb reader that can take advantage of the UHS-II host type, but again, that's not something that will give you any benefit when you're filming (but might when you're downloading from the card to a computer).
The Extreme PLUS line is a step up from the standard Extreme. In my tests, the Extreme PLUS does have a faster sequential write speed than the Extreme, but you won't get any added benefit from that in the camera--both exceed the speed requirements of the GoPro HERO's data stream.
Delkin Devices have been making memory cards for a long time, and good ones at that. But it's only recently that they simplified and streamlined their product lines to make it clearer what the differences are between cards. The Select line isn't their fastest line--that is the Power V90 line--but the Select series are rated for V30 and are good combination of being fast enough for the HERO (2018) as well as cost-effective.
This card is rated for V30 and has a UHS-I interface. It's available in sizes ranging from 16GB up through 512GB and it comes with an SD adapter.
PNY is another memory card brand that isn't as well known as some of the others, but in my experience they make very good cards. They have a few different ranges, but the Elite-X strikes a good balance of being fast enough and good value.
They're UHS-I cards and carry a V30 rating. The 32GB card is a tad slower than the larger capacities, but most users will probably prefer sizes more on the 128GB-256Gb end of the range anyway.
While Transcend doesn't have the same marketing budget in the US as some of the bigger brands, they're actually one of the major players in memory cards globally, and in addition to the consumer market they also make specialist industrial and high-durability cards.
This card has a rated write speed of up to 85MB/s and read speed of up to 95MB/s.
Buy at: Amazon
The GoPro HERO (2018) is fully compatible with both the microSDXC and microSDHC specifications (I have more on that below). So you can use cards ranging from 8GB up through 256GB or even larger. Probably the sweet spot in terms of cost-effectiveness and convenience of not having to constantly clear off the card is in the 64GB to 256GB range.
The cameras use the UHS-I host specification, so you won’t get added benefits if you put a UHS-II card in them. That is, you can use a UHS-II card if you like, but the camera will treat it as a UHS-I card.
For the speed rating, the safest bet is to stick with one that’s rated with the new V30 category or U3, although there are also U1 cards that work just fine.
The main reason you need a reasonably fast SD card in GoPros is to cope with the data that needs to be written quickly to the card when recording video (and, to a much lesser extent, in the buffer modes when taking still images). That data flow is referred to as the bitrate. There are many other things that also go into video quality, but the higher the bitrate, the lower the amount of compression, and therefore there’s potentially higher video quality.
If you look at the specs on GoPro’s website you’ll see it says that the maximum bitrate of the HERO (2018) is 60 Mbps, which is the same as the HERO5 Black. But so far as I can tell from the actual video files created from the HERO (with firmware 01.00.00), there’s no combination of settings that can currently encode the camera’s variable bitrate data stream at 60 Mbps (it comes out at 45 Mbps).1
|Resolution||Framerate (fps)||Bitrate (Mbps)||Encoding||Fields of View (FOV)|
|1080p (1920x1080)||60||30||NTSC||Wide |
Video bitrates are conventionally measured in megabits per second, usually written as Mbps but also sometimes as Mb/s. The speed of memory cards is conventionally measured in megabytes per second, or MBps or MB/s (note the capitalized “B”). There are 8 megabits in 1 megabyte. So 45Mbps (megabits per second) is equivalent to about 5.6 MB/s (megabytes per second). Unfortunately, that’s not the end of the story. It would be nice if that meant that you could just make sure your card had a write speed faster than 5.6 MB/s, but other factors come into play in practice, including inflated manufacturer speed ratings, sustained speeds vs peak speeds, and, most importantly the role of host devices and connections in decreasing the efficiency of the data transfer (ie. there are crucial bottlenecks). All of which means that it’s best to stick to cards that are known to work.
X Rating vs MB/s. Some manufacturers use a more cryptic x rating in place of MB/s. Lexar, in particular, has long used this system. It comes from the old way of measuring the speed of CD-ROM drives when the standard speed of a CD-ROM drive was 150KB/s. Each x, therefore, equals 150KB/s.
The GoPro HEROs are compatible with both the microSDHC and microSDXC formats, so you can use either. In practical terms, microSDHC refers to a card that has a storage capacity of 32GB or smaller and microSDXC refers to one that is 64GB or larger.
SDHC (Secure Digital High Capacity) is a design specification that refers to SD cards that are between 4GB and 32GB in capacity and formatted with the FAT32 filesystem. FAT32 supports individual files up to a maximum of 4GB.
SDXC (Secure Digital eXtended Capacity) refers to SD cards with a capacity larger than 32GB and with a maximum theoretical limit of 2TB. They’re formatted in the exFAT filesystem.
SD cards are given a speed class rating that refers to its category for writing data, with each category describing a real-world video recording use. The most relevant ones here are Class 10, U1, and U3. Look for either a U3 or U1. If the card says C10 but doesn’t include a U1 or U3, its write speed is most likely too slow.
Class 10 is designed to support 1080p recording at a minimum (but again, not at all framerates) with a minimum serial write speed of 10 MB/s. You’ll often see it marketed as “full HD”, but that’s pretty outdated now. What “full HD” means in this context is 1080HD video, which is no longer a cutting-edge HD video mode.
U1 is designed to support real-time broadcasts and HD video (720p and 1080p) with a minimum serial write speed of 10 MB/s.
U3 is designed to support 4K video recording at a sustained video capture rate of 30MB/s.
V30 is a new video speed class put out by the SD Association that applies to cards that are rated for a minimum sequential write speed of at least 30MB/s. The specifications allow for faster and slower ratings—all the way up to V90 for 8K video—but V30 is the most relevant for the current generation of cards and the GoPro HERO.
A1 / A2. Finally, you might have noticed the speed ratings A1 starting to appear on some of the newer cards. That’s a different type of speed rating geared toward apps. Devices that run apps, like smartphones and gaming devices, don’t send a long stream of continuous data but rather lots of small chunks of data. So they need cards with fast random write speeds. And that’s where the A ratings come in–to help identify cards that are suitable for app devices. So it’s not really relevant for using SD cards in GoPros. I have a more detailed explanation of the A1 and A2 ratings separately.
Newer microSDHC and microSDXC cards have a feature called ultra high-speed bus, which refers to the interface. So far, there is UHS-I and UHS-II. Both types of cards will work in the GoPro HERO, although you won’t get any benefit in using a UHS-II card over a UHS-I one.
The product labeling for cards with this technology will have either UHS-I or UHS-II, or sometimes just I or II. Technically, it should be Roman numerals, but you’ll sometimes see it listed with a number 1, like UHS-1, even by some manufacturers.
Yes. So long as the card has a fast enough write speed, there’s no problem using the 128GB or 256GB version. Several of the cards listed above have options in those sizes.
Images and product information from Amazon PA-API were last updated on 2020-10-25 at 10:29. Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on Amazon Site at the time of purchase will apply to the purchase of this product.
There can be several reasons why photos and videos go missing from memory cards. But you can often recover at least some of them. I have a more detailed post on how to recover deleted GoPro videos and photos from SD cards, but here's the quick version:
This post was last modified on October 9, 2020 2:45 pm