How GoPro’s Auto Setting in Burst Mode Photos Works

Among the Burst Mode options on newer GoPros is an Auto setting. It prioritizes better exposure over forcing the number of shots. Here's how it…

When the GoPro HERO6 Black was released in mid-2017, it included a new feature that’s not well explained in the instruction manual. It relates to the Burst Mode for taking a rapid sequence of photos. Newer models, such as the HERO8 Black and HERO7 Black also include this feature.

For the most part, the Burst mode options on the HERO6 Black are identical to its predecessor, the HERO5 Black. They both have these options:

  • 30 photos spanning 1, 2, 3, or 6 seconds
  • 10 photos spanning 1, 2, or 3 seconds
  • 5 photos in 1 second
  • 3 photos in 1 second

But there’s one new setting available: Auto.

If you read the manual (p.59) you’ll find this explanation for the setting:

Get the GoPro HERO8 Black for $299.98, incl. 1-year Subscription to GoPro

With the new HERO9 Black just released, GoPro is running a great deal on the previous model, the HERO8 Black. You can get it for $299.98, and that includes a 1-year subscription to GoPro as well as a 32GB SD card.

The subscription to GoPro gives you unlimited cloud storage, discounted no-questions-asked camera replacement, and up to 50% off GoPro accessories.

You can find the deal at GoPro.com.

Auto (up to 30 photos in 1 second).

That’s it. That’s not especially helpful, and it wasn’t clear to me at first what that meant. So I did some experimenting to figure it out.

Basically, it works like this. Most of the time, you’ll get the same results using the 30/1 setting or the Auto setting. The Auto only comes into play if the shutter speed drops below 1/30 second.

It’s conceptually similar to the low-light option when shooting video. It’s a fallback that priorities exposure quality over slavishly hitting a prescribed number of frames.

Here’s an illustration of what I mean. These burst mode sequences were shot simultaneously on two cameras.

The first example is the result from using the 30/1 setting. Sure enough, it took 30 photos. Each had a shutter speed of 1/30s, the slowest that was possible to still fit in 30 photos in one second. But because of the low light where a shutter speed slower than 1/30 was really needed, they’re all under exposed.

Here’s a sequence shot simultaneously on a HERO6 Black with the Burst Mode: Auto setting turned on instead.

This time, the camera put a priority on taking properly exposed images. That required slowing the shutter speed to 1/12s. That, of course, meant that there was no way to take more than 12 photos within a second.

So what the Burst Mode: Auto setting did was prioritize a better exposure, even if that means slowing the shutter speed below 1/30s and therefore not being able to take the full 30 photos within the time limit.

Things Worth Knowing

There are a couple of related things worth mentioning.

Because the aperture of the GoPro lens remains constant at f/2.8, it means that only the other two sides of the exposure triangle can be changed to adjust for proper exposure: ISO and shutter speed.

In Burst Mode, the exposure isn’t calculated for each individual shot. It’s calculated up front and the same exposure settings are applied to all the following photos in the sequence.

In Short

So, in short, the Burst Mode: Auto setting takes as many photos as it can in 1 second while still using correct exposure, even if that means using a slower shutter speed than 1/30 second and therefore taking fewer than 30 frames in that second.

More GoPro Tips & Tricks:

This post was last modified on April 8, 2020 8:06 am

Share