Hands on with the MeFOTO Globetrotter Air Travel Tripod

MeFOTO is a relatively new player in the tripod game. They’re part of the Mac Group, which also includes the Benro and Induro brands of tripods as well as Tenba camera bags. While Induro and Benro have much broader product ranges, MeFOTO focuses exclusively on highly portable tripods and accessories that are directly related, like smartphone adapters.

I’ve used a couple of MeFOTO’s tripods before and been impressed. I don’t know how much collaboration goes on behind the scenes between the various tripod brands in the Mac Group, but I’ve found MeFOTO tripods to be well put together.

This one, the GlobeTrotter Air, is a new model. It’s a compact and ultra-portable aluminum travel tripod. It’s the heaviest-duty in their Air series and is designed for DSLRs. For smaller, lighter cameras there’s also Backpacker Air and Roadtrip Air ranges. MeFOTO and B&H Photo sent me one of the Globetrotter Airs to try out, so I put it through its paces on a recent trip to Mexico City.

Overall

It’s a kit, so it includes legs and a ballhead. It’s rated for a load capacity of 17.6 pounds (8kg) and weighs 3.2 pounds (1.4 kg).

It’s only available in aluminum. I typically prefer carbon tripods for their weight savings and extra rigidity when they’re available, but there is no carbon version of this one. It’s possible that might have something to do with the distinctive locking mechanism used here.

Legs

Like many of the current generation of travel tripods, the legs fold back over the center column in order to make an ultra-compact package for portability. When you want to use the tripod, you flip them back the other way, opposite to the way the center column extends.

The legs are in five sections that extend. Fully extended, they reach about 68 inches (1.7 meters), and folded down completely they tuck away to a package that’s just a little over 12 inches (30 cm) long. Folded up, it’s among the smallest available and easily fits in carry-on bags and many walking-around backpacks. In my international carry-on sized wheeled bag it even fit across the bag, not just lengthways.

Extending the leg sections is handled a bit differently that most other tripods. Most tripods use a staggered retraction system where the lower section stick out from the one immediate about even when full retracted. With this tripod, all of the lower section telescope from inside the outermost section. Or, put another way, all of inner sections disappear completely into the outermost section. A single twist from the rubber foot locks each of the sections in place; MeFOTO gives the system a fancy name–HyperLock—but it’s basically the same as that used on some selfie sticks, albeit a bit more robust.

There are some upsides to this approach. Fewer locking mechanisms simplifies things and can reduce weight. It also means that the very lowest leg segment is thicker and sturdier than some of the flimsy sections in other tripods.

There are also some downsides. While it’s technically possible to lock each section independently, it’s not easy to do. In many uses you may not need that level of precise control, but there are some users for whom it will be an issue. You can, of course, set the length of extension of each leg independently.

The rubber foot serves as the lock grip, and the feet aren’t removable.

Something I haven’t tried is using it around the combination of water and grit. Those can be enemies of telescoping extensions at the best of times, and I have a suspicion that they might be especially problematic with the system that this tripod uses. I’ve found no easy way to disassemble the legs to clean them out. But, as I say, I haven’t yet tried it in those conditions, and it’s speculation on my part for now. Landscape shooters, in particular, might want to do some testing before heading out on a critical shoot.

Center Column

The center column uses the same kind of extension system, and fully extended it’s unusually long. It’s surprisingly free of any give in the joints, but I did find that it was hard to get a secure lock where it wouldn’t slip down if you tried pushing it down. Part of the problem is that you need to hold onto something to make the twist lock work, and the natural place to do that is the tripod head itself. But if you don’t have the rotating pano axis locked securely, you don’t really get a good grip. Even with that properly locked, though, I never found a way to lock it so securely that it still couldn’t rotate under pressure. I never had it slip under the weight of a camera, but it does introduce an unwanted element of doubt and is a weak area with this model.

The center column is also reversible so that you can shoot low to the ground for macro work or for a low perspective.

Unlike some other tripods, you can’t attach the center column to a detachable leg to make a monopod. But you can remove the center column to make what MeFOTO calls “a built-in selfie stick.” That’s mostly the marketing department getting a bit carried away, and I’m not sure how useful that “feature” is in practice, but MeFOTO has thrown in a small Bluetooth remote and clip for good measure.

Head

The ballhead is pretty straightforward. It uses a standard configuration of four locking knobs. One locks the 360° panning base. A large one controls the clamp on the ball. And, in a nice touch that isn’t available on MeFOTO’s smaller models, there’s also a friction control knob that provides an extra level of control over the ball clamp. And a third clamps on the quick release plate.

It comes with an Arca-style quick release plate.

I like that it includes a friction control in addition to the main ball lock. That gives you more control over positioning, especially with heavier camera and lens combinations.

But there’s one big negative for me: the ballhead isn’t removable. At least, not easily. You can’t just unscrew it and replace it with another one. There are some screws in its base that suggest you might be able to remove it if you go to some trouble, but I haven’t tried it and it’s not designed to work that way in normal use.

Colors

Making tripods sexy isn’t easy. One of the approaches several manufacturers have tried lately is offering a choice of colors. So if you old-fashioned black isn’t quite your style, this one comes in a choice of 6 colors in addition to the traditional black: blue, green, orange, red, titanium (silvery grey), and purple.

You can even get matching Arca-style quick release plates to keep things color coordinated (or mix things up, if that’s your fancy).

What’s in the Box?

It comes with a light fabric carrying case (not padded) and a quick-release plate. There’s also an allen key for adjusting the tension of the joints where the legs attach to the shoulder. And there’s a simple, small Bluetooth remote (model MK10) and clip-on holder, and a basic phone holder so that you can mount your smartphone on the tripod.

Tech Specs

Made of: Aluminum alloy
Load Capacity: 17.6 lb (8 kg)
Maximum Height: 68.1″ (173 cm)
Maximum Height w/o Column Extended: 45.1″ (114.5 cm)
Minimum Height: 12″ (30.5 cm)
Folded Length: 16.7″ (42.5 cm)
Leg Sections: 5
Leg Lock Type: Twist (HyperLock)
Spiked Feet; No
Weight: 3.2 lb (1.4 kg)
Head Type: Ball head
Quick Release: Yes, Arca-type
Bubble Level: No
Tension Control: No

Compared To

	Gitzo Traveler Kit (Series 2)	Gitzo GT1542T	MeFOTO Globetrotter	Manfrotto BeFree	Induro Grand Turismo CGT114	Sirui T-2205X	Benro GoTravel 2	Benro C1682TV1 Travel Angel II	3 Legged Thing Leo	3 Legged Thing Brian	3 Legged Thing Rick	3 Legged Thing Roger	Oben CT-3581	Sirui T-1024XL	Varavon Baby T3	Kirk Mini	MeFOTO Globetrotter Air
Review	Review	Review	Review	Review	Review	Review	Review	Review	Review	Review	Review		Review		Review	Review	Review
Model No.	GK2580TQD	GT1542T	C2350Q2T	MKBFRC4-BH	CGT114	T-2205X	GC269TB2	C1682TV1	3LLEOKIT	E3BRIAN	3PKRICK	E3ROGERBL	CT-3581	SUT1204XL	BABY T3	TT-1	GTAIRBLK
Made of	Carbon fiber	Carbon fiber	Carbon fiber	Carbon fiber	Carbon fiber	Carbon fiber	Carbon fiber	Carbon fiber	Carbon fiber	Carbon fiber	Carbon fiber	Alloy	Carbon fiber	Carbon fiber	Aluminum	Aluminum/Stainless Steel	Aluminum Alloy
Leg Sections	4	4	5	4	4	5	5	4 (also version with 5)	5	5	5	5	5	4	3	1	5
Folded length	16.9 in 43 cm	16.7 in 42.5 cm	16.1 in 41 cm	15.8 in 40 cm	17.3 in 44 cm	14.6 in 37 cm	16.5 in 42 cm	17.7 in 45 cm	13.75 in 34.8 cm	15.75 in 40 cm	12.6 in 32 cm	15.75 in 40 cm	16.9 in 42.9 cm	18.3 in 46.5 cm	10.8 in 27.5 cm	4.4 in 11.3 cm	16.7 in 42.5 cm
Weight	4.19 lb 1.9 kg	2.2 lb 1 kg	3.7 lb 1.7 kg	2.4 lb 1.1 kg	3.5 lb 1.6 kg	2.6 lb 1.2 kg	4.1 lb 1.9 kg	3.5 lb 1.6 kg	3.2 lb 1.45 kg	4.1 lb 1.9 kg	2.7 lb 1.2 kg	4.5 lb 2 kg	3.9 lb 1.7 kg	2.2 lb 1 kg	1.8 lb 820 g	9 oz 255 g	3.2 lb 1.4 kg
Max height	60.6 in 154 cm	58.7 in 149 cm	64.2 in 163 cm	56.7 in 144 cm	62.6 in 159 cm	56.9 in 145 cm	64.6 in 164 cm	63 in 160 cm	51.5 in 131 cm	76.4 in 194 cm	56.7 in 144 cm	68.6 in 174 cm	67.9 in 172.5 cm	63 in 160 cm	17.3 in 44 cm	4.4 in 11.3 cm	68.1 in 173 cm
Max load	15.4 lb 7 kg	17.6 lb 8 kg	26.5 lb 12 kg	8.8 lb 4 kg	32 lb 14.5 kg	26.5 lb 12 kg	30.9 lb 14 kg	30.8 lb 14 kg					26.4 lb 12 kg	26.5 lb 12 kg	17.6 lb 8 kg	100 lb 45 kg	17.6 lb 8 kg
Available w/Head?	Yes	No	Yes	Yes	Yes	No	Yes	Yes	Yes	Yes	Yes	Yes	Yes	Yes	Yes (not removable)	No	Yes (not removable)
Monopod?	No	No	Yes	No	No	No	Yes	Yes	Yes	Yes	Yes	Yes	Yes	No	No	No	No
List Price	$1,099	$750	$399	$350	$490	$415	$525	$419	$349.99	$499	$249	$369	$349	$370	$150	$120	$225

Wrap Up

Pros:

• Very compact when folded down. Easily fits in carry-on or a backpack.
• The distinctive one-twist extensions system for the legs and center column is quick and easy to use.
• Ballhead has friction control.
• Good stability for the size and weight.
• Feels solid and well-made.

Cons:

• Locking system for extending legs and center column isn’t as lock-tight as it could be.
• Ballhead isn’t removable.
• Feet aren’t removable (no steel spikes).
• Aluminum only — no carbon version.

Buy At

B&H Photo and Amazon.

Images and product information from Amazon Product Advertising API were last updated on 2019-11-19 at 16:38.