Review of the Kirk TT-1 Mini Table Top Tripod

The Kirk TT-1 is an unusually solid table-top tripod rated for loads up to 100 pounds but is small and lightweight, easily fitting in a camera bag's pocket.

This is another review in my ongoing series on travel tripods. I’m including a small selection of tabletop tripods as well. Most tabletop tripods are lightweight and pretty flimsy. But there are a few that are much sturdier and are suitable for even larger DSLRs and mirrorless camera and lens combinations, and it’s those that I’m focusing on.

The Kirk TT-1 is one of them. It’s not very big and fits easily in a camera bag pocket, but it punches well above its weight in terms of load-bearing capability. It’s very solidly built, which you can feel the moment you pick it up.

In terms of size, it looks pretty much like the kind of small, lightweight, portable tripod you might use for a cell-phone, a GoPro, or other very small and lightweight camera.

But the Kirk TT-1 stands out because of its strength. It’s incredibly sturdy for its size and is rated to support loads up to 100 lb (45kg). There aren’t any frills–there isn’t even any branding on it–and the whole thing is made of aluminum and stainless steel, with each of the legs a single piece of metal without joins, so there really aren’t any weak points for things to go wrong.

Its legs are slightly staggered, so that when you rotate them around and line them up, they close up into a compact shape that fits easily in a camera bag’s pocket. It folds and unfolds very quickly and weighs only 9 oz (255 g). It doesn’t extend, so it has a constant height of 4.4″ (11 cm).

There’s a large knob at the bottom that locks (or loosens) the rotation of the legs, acting basically like a friction clamp on the legs to hold them in place.

On the top is a standard 1/4″-20 stud.

The maximum stability is when the center of gravity of the load is directly over the center column. But in practice, that often isn’t a practical option. When fully rotated and evenly spaced, the legs cover an area with a diameter of around 10 inches. That’s a factor if you’re using longer lenses or trying to control the center of gravity. If you shift the center of gravity out over one of the legs, you can use small- and medium-sized DSLR lenses, but the larger the lens, the more careful you’re going to have to be in balancing the center of gravity. I’m confident using it with a large-ish DSLR like a Nikon D810 and a small lens, but I am more hesitant with larger lenses. But I have tried it on a flat, stable surface like a table with a Nikon D810 and Nikon 80-400mm, mounting with the lens’s collar mount, and it worked fine. Adding the extra height of a head is also a consideration in balancing the center of gravity.

Its feet are small rubber buttons. They offer some grip, but because they only offer a small surface area, it’s not as much as I’d prefer when using heavier loads.

Adding a Tripod Head

You can, of course, attach a camera directly onto the tripod screw. But that’s not going to give you any flexibility for angling the shot since it’s in a fixed position.

To get more flexibility, you can add a small tripod head. But ideally it should be a small one in the mini ball-head categroy. The base on which it sits isn’t very wide, so a larger head with a broad base isn’t going to get a lot of grip.

The tripod has an embedded 1/4″-20 stud but doesn’t come with a 3/8″-16 thread adapter, so you’ll need to pick one of those up separately if that’s what your head attaches with.

You can also attach a quick release plate directly, although that won’t add any directional flexibility–just the convenience of attaching and detaching quickly.

What’s in the Box

This one doesn’t actually come in a box at all. In keeping with the no-frills approach, it’s simply shrink-wrapped against a sheet of Kirk Enterprises-branded cardboard. There are no accessories, cases, or even instruction manuals–just the tripod itself.

Specs

Height: 4.44″ (11.3 cm)
Load Capacity: 100 lb (45 kg)
Thread Size: 1/4″-20
Weight: 9 oz (255 g)
Made in: United States

Quibbles

Overall, it’s simple, rock-solid, and reliable. Kirk gear tends to be unusually well built, and the TT-1 is no exception. There’s really not much to go wrong, and I have no complaints with the core functionality. But there are a couple of minor things where I can see some room for improvement.

One is that the base where you attach the camera or a tripod head would be broader and give more grip and stability. It’s big enough to take a mini ballhead, bud most of the mini ballheads don’t approach anywhere near the load-bearing limit of these legs, and the larger heads that can carry larger loads don’t get as good a grip on the legs as they could.

The other is that the feel would be broader and give better grip on uneven or slick surfaces (like stone walls, etc.). The existing rubber button feet aren’t bad, but they don’t offer as much surface-area contact as they could. Of course, the benefit of the slim feet it currently has comes when you fold it up, and they don’t overlap.

Compared To

Gitzo Traveler Kit (Series 2)Gitzo GT1542TMeFOTO GlobetrotterManfrotto BeFreeInduro Grand Turismo CGT114Sirui T-2205XBenro GoTravel 2Benro C1682TV1 Travel Angel II3 Legged Thing Leo3 Legged Thing Brian3 Legged Thing Rick3 Legged Thing RogerOben CT-3581Sirui T-1024XLVaravon Baby T3Kirk MiniMeFOTO Globetrotter Air



ReviewReviewReviewReviewReviewReviewReviewReviewReviewReviewReviewReviewReviewReviewReviewReview
Model No.GK2580TQDGT1542TC2350Q2TMKBFRC4-BHCGT114T-2205XGC269TB2C1682TV13LLEOKITE3BRIAN3PKRICKE3ROGERBLCT-3581SUT1204XLBABY T3TT-1GTAIRBLK
Made ofCarbon fiberCarbon fiberCarbon fiberCarbon fiberCarbon fiberCarbon fiberCarbon fiberCarbon fiberCarbon fiberCarbon fiberCarbon fiberAlloyCarbon fiberCarbon fiberAluminumAluminum/Stainless SteelAluminum Alloy
Leg Sections44544554 (also version with 5)555554315
Folded length16.9 in
43 cm
16.7 in
42.5 cm
16.1 in
41 cm
15.8 in
40 cm
17.3 in
44 cm
14.6 in
37 cm
16.5 in
42 cm
17.7 in
45 cm
13.75 in
34.8 cm
15.75 in
40 cm
12.6 in
32 cm
15.75 in
40 cm
16.9 in
42.9 cm
18.3 in
46.5 cm
10.8 in
27.5 cm
4.4 in
11.3 cm
16.7 in
42.5 cm
Weight4.19 lb
1.9 kg
2.2 lb
1 kg
3.7 lb
1.7 kg
2.4 lb
1.1 kg
3.5 lb
1.6 kg
2.6 lb
1.2 kg
4.1 lb
1.9 kg
3.5 lb
1.6 kg
3.2 lb
1.45 kg
4.1 lb
1.9 kg
2.7 lb
1.2 kg
4.5 lb
2 kg
3.9 lb
1.7 kg
2.2 lb
1 kg
1.8 lb
820 g
9 oz
255 g
3.2 lb
1.4 kg
Max height60.6 in
154 cm
58.7 in
149 cm
64.2 in
163 cm
56.7 in
144 cm
62.6 in
159 cm
56.9 in
145 cm
64.6 in
164 cm
63 in
160 cm
51.5 in
131 cm
76.4 in
194 cm
56.7 in
144 cm
68.6 in
174 cm
67.9 in
172.5 cm
63 in
160 cm
17.3 in
44 cm
4.4 in
11.3 cm
68.1 in
173 cm
Max load15.4 lb
7 kg
17.6 lb
8 kg
26.5 lb
12 kg
8.8 lb
4 kg
32 lb
14.5 kg
26.5 lb
12 kg
30.9 lb
14 kg
30.8 lb
14 kg
26.4 lb
12 kg
26.5 lb
12 kg
17.6 lb
8 kg
100 lb
45 kg
17.6 lb
8 kg
Available w/Head?YesNoYesYesYesNoYesYesYesYesYesYesYesYesYes (not removable)NoYes (not removable)
Monopod?NoNoYesNoNoNoYesYesYesYesYesYesYesNoNoNoNo
List Price$1,099$750$399$350$490$415
$525$419$349.99$499$249$369
$349
$370
$150
$120
$225

Conclusion

If you’re after an unusually sturdy tabletop tripod, this is well worth a try. It’s simpler and smaller than something like the Varabon Baby T3 Mini Tripod but offers outsized stability. Another option that’s very similar is Leica’s Tabletop Tripod.

It’s most useful when paired with a small ballhead, but you’ll need to pick that up separately (and potentially a thread adapter as well). It’s not well-suited to shooting on uneven surfaces, and longer lenses might destabilize it, but in the right conditions, it can be a very handy and reliable go-anywhere piece of kit.

Available From

The Kirk TT-1 Mini Table Top Tripod is available from B&H Photo with a manufacturer’s list price of $119.95.

View Comments

Share