GoPro Battery & Charger Compatibility, Model by Model

Think any GoPro battery fits any GoPro? It doesn’t work that way. This chart matches the exact battery and charger model to every GoPro camera, from the HERO13 Black and MAX 2 all the way back to the original HD HERO.

GoPro Battery & Charger Compatibility, Model by Model
Text & Photos By David Coleman
Last Revised & Updated:

I MAY get commissions for purchases made through links in this post.

Battery finder: Which battery does your GoPro camera take?

Have Camera Will Travel

Start typing your camera model. The battery and charger appear below, with links to buy.

Battery & charger compatibility chart for GoPro cameras

Whether you’re looking for a replacement battery or a spare (or two), here are the model numbers for GoPro batteries that correspond to GoPro cameras.

HERO

CameraBatteryChargerNotes
LIT HEROBuilt-in (non-removable)Sealed Enduro battery — no spare-battery SKU; Charges in-camera over USB-C.
HERO13 BlackEnduro (AEBAT-001) (original)
Also supported: Enduro 2 (AGBAT-001) — GoPro-confirmed
Also at: GoPro.com · B&H Photo
AEDBD-201 In box1900mAh; Not compatible with earlier GoPros. The Enduro 2's extra fast charging applies in MISSION 1 bodies and its dual charger, not in the HERO13 itself.
HERO (2024)Built-in (non-removable)Sealed Enduro battery; Charges in-camera over USB. GoPro publishes no capacity figure.
HERO12 BlackEnduro (ADBAT-011)
Also at: GoPro.com · B&H Photo
ADDBD-211 In box1720mAh; GoPro sells no standard (non-Enduro) battery for the HERO12.
HERO11 BlackEnduro (ADBAT-011)
Also at: GoPro.com · B&H Photo
ADDBD-211 In box1720mAh.
HERO11 Black MiniBuilt-in (non-removable)Sealed 1500mAh Enduro battery; Charges in-camera over USB-C.
HERO10 BlackADBAT-001 (original)
Also supported: Enduro (ADBAT-011) — GoPro-confirmed
Also at: GoPro.com · B&H Photo
ADDBD-211 In boxShipped with the 1720mAh standard battery; The Enduro is GoPro's cold-weather upgrade.
HERO10 Black BonesNone (drone-powered)
Also at: GoPro.com
No battery of its own — this is the stripped-down FPV version, and it draws power from the drone's flight pack through a three-pin lead. GoPro specifies 5–27V, which covers 2S to 6S LiPo, and a BEC is in the box. Two things worth knowing before you wire one in: the shutter connect wire must not see more than 5V or you can permanently damage the camera, and fitting it takes some soldering.
HERO9 BlackADBAT-001 (original)
Also supported: Enduro (ADBAT-011) — GoPro-confirmed
Also at: GoPro.com · B&H Photo
ADDBD-211 In boxShipped with the 1720mAh standard battery; The Enduro is GoPro's cold-weather upgrade.
HERO8 BlackAJBAT-001
Also at: GoPro.com · B&H Photo
AJDBD-001 In box1220mAh.
HERO7 BlackAABAT-001 (original)
Also supported: AJBAT-001GoPro-confirmed
Also at: GoPro.com · B&H Photo
AADBD-001 In box1220mAh.
HERO7 SilverBuilt-in (non-removable)Sealed 1220mAh battery; Charges in-camera over USB-C. Not user-replaceable.
HERO7 WhiteBuilt-in (non-removable)Sealed 1220mAh battery; Charges in-camera over USB-C. Not user-replaceable.
HERO (2018)AABAT-001 (original)
Also supported: AJBAT-001GoPro-confirmed
Also at: GoPro.com · B&H Photo
AADBD-001 In box1220mAh. Needs a GoPro software update to use the newer AJBAT-001.
HERO6 BlackAABAT-001 (original)
Also supported: AJBAT-001GoPro-confirmed
Also at: GoPro.com · B&H Photo
AADBD-001 In box1220mAh.
HERO5 BlackAABAT-001 (original)
Also supported: AJBAT-001GoPro-confirmed
Also at: GoPro.com · B&H Photo
AADBD-001 In box1220mAh. Needs a GoPro software update to use the newer AJBAT-001.
HERO+ LCDBuilt-in (non-removable)Sealed battery.
HERO+Built-in (non-removable)Sealed battery.
HERO4 BlackAHDBT-401
Also at: B&H Photo
AHBBP-401 In box1160mAh; GoPro no longer sells this battery or charger.
HERO4 SilverAHDBT-401
Also at: B&H Photo
AHBBP-401 In box1160mAh; GoPro no longer sells this battery or charger.
HERO (2014)Built-in (non-removable)Sealed battery.
HERO3+ BlackAHDBT-302
Also at: B&H Photo
AHBBP-301 In box1180mAh. GoPro's own listing for this pack reads “Compatibility: HERO3+, HERO3” — the AHDBT-302 replaced the 1050mAh AHDBT-301 that came with the original HERO3, and GoPro then sold it as the spare for both cameras. If you own a HERO3 and a HERO3+, one set of spares covers them. Note that GoPro's support page quotes this cell at 1080mAh while its store listing says 1180mAh; the 4366mWh figure both cite works out to 1180.
HERO3+ SilverAHDBT-302
Also at: B&H Photo
AHBBP-301 In box1180mAh. GoPro's own listing for this pack reads “Compatibility: HERO3+, HERO3” — the AHDBT-302 replaced the 1050mAh AHDBT-301 that came with the original HERO3, and GoPro then sold it as the spare for both cameras. If you own a HERO3 and a HERO3+, one set of spares covers them. Note that GoPro's support page quotes this cell at 1080mAh while its store listing says 1180mAh; the 4366mWh figure both cite works out to 1180.
HERO3 BlackAHDBT-301 (original)
Also supported: AHDBT-302GoPro-confirmed
Also at: B&H Photo
AHBBP-301 In boxThe pack that shipped with the HERO3 is the AHDBT-301 — 1050mAh, 3.7V lithium-ion, by GoPro's own specification. Early in 2014 GoPro replaced it with a 1180mAh pack, renumbered AHDBT-302, and listed that one as fitting “HERO3+, HERO3”. So the 302 is what you will actually find for sale, GoPro says it fits this camera, and it holds more charge than the original. Nothing on the camera or in the manual prints a part number, so go by the listing.
HERO3 SilverAHDBT-301 (original)
Also supported: AHDBT-302GoPro-confirmed
Also at: B&H Photo
AHBBP-301 In boxThe pack that shipped with the HERO3 is the AHDBT-301 — 1050mAh, 3.7V lithium-ion, by GoPro's own specification. Early in 2014 GoPro replaced it with a 1180mAh pack, renumbered AHDBT-302, and listed that one as fitting “HERO3+, HERO3”. So the 302 is what you will actually find for sale, GoPro says it fits this camera, and it holds more charge than the original. Nothing on the camera or in the manual prints a part number, so go by the listing.
HERO3 WhiteAHDBT-301 (original)
Also supported: AHDBT-302GoPro-confirmed
Also at: B&H Photo
AHBBP-301 In boxThe pack that shipped with the HERO3 is the AHDBT-301 — 1050mAh, 3.7V lithium-ion, by GoPro's own specification. Early in 2014 GoPro replaced it with a 1180mAh pack, renumbered AHDBT-302, and listed that one as fitting “HERO3+, HERO3”. So the 302 is what you will actually find for sale, GoPro says it fits this camera, and it holds more charge than the original. Nothing on the camera or in the manual prints a part number, so go by the listing.
HD HERO2AHDBT-002
Also at: B&H Photo
3.7V, 1100mAh. GoPro sold this pack as fitting “ALL HD HERO Original + HD HERO2 Professional Cameras”, so it also covers the first-generation HD HERO and HD HERO 960 — one spare serves all three. The HD HERO2 manual never prints the part number; it calls the cell only a “Rechargeable Li-Ion Battery”.
HD HERO 960AHDBT-001 (original)
Also supported: AHDBT-002GoPro-confirmed
Also at: B&H Photo
The HD HERO shipped with the AHDBT-001 — 3.7V, 1100mAh, and GoPro's page for it said plainly that it was “for use in HD HERO cameras only”. GoPro later replaced it with the AHDBT-002, same 3.7V and 1100mAh, sold as fitting “ALL HD HERO Original + HD HERO2 Professional Cameras”. That is the one you will find today, and it is the same cell by GoPro's own numbers, so there is nothing to gain from hunting down an original 001.
HD HEROAHDBT-001 (original)
Also supported: AHDBT-002GoPro-confirmed
Also at: B&H Photo
The HD HERO shipped with the AHDBT-001 — 3.7V, 1100mAh, and GoPro's page for it said plainly that it was “for use in HD HERO cameras only”. GoPro later replaced it with the AHDBT-002, same 3.7V and 1100mAh, sold as fitting “ALL HD HERO Original + HD HERO2 Professional Cameras”. That is the one you will find today, and it is the same cell by GoPro's own numbers, so there is nothing to gain from hunting down an original 001.

MAX / 360

CameraBatteryChargerNotes
MAX2Enduro (AMBAT-001)
Also at: GoPro.com · B&H Photo
AMDBD-001 In box1960mAh; Not compatible with the original MAX.
MAXEnduro (ACBAT-011)
Also at: GoPro.com · B&H Photo
ACDBD-001 In box1600mAh. Originally shipped with the standard ACBAT-001, which GoPro no longer lists — the Enduro version is the one GoPro sells today.
FusionASBBA-001
Also at: B&H Photo
ASDBC-001 In box2620mAh — the biggest cell GoPro put in a camera of that era, which the Fusion needed to run two sensors at once. It is a Fusion-only pack: GoPro lists its compatibility as the Fusion and nothing else, and no other GoPro battery fits.

Session

CameraBatteryChargerNotes
HERO5 SessionBuilt-in (non-removable)Sealed 1030mAh battery; Charges in-camera over USB-C.
HERO SessionBuilt-in (non-removable)Sealed 1030mAh battery; Charges in-camera over micro-USB.
HERO4 SessionBuilt-in (non-removable)Sealed 1030mAh battery; Charges in-camera over micro-USB.

MISSION

CameraBatteryChargerNotes
MISSION 1 PRO ILSEnduro 2 (AGBAT-001) Preferred (original)
Also supported: Enduro (AEBAT-001) — GoPro-confirmed
Also at: GoPro.com · B&H Photo
2150mAh. GoPro lists this pack as fitting the whole MISSION 1 series and the HERO13 Black, so a HERO13 owner moving to a MISSION 1 keeps their spares. The older 1900mAh Enduro (AEBAT-001) fits the same cameras; the Enduro 2 holds more and, GoPro says, charges faster than any previous GoPro battery.
MISSION 1 PROEnduro 2 (AGBAT-001) Preferred (original)
Also supported: Enduro (AEBAT-001) — GoPro-confirmed
Also at: GoPro.com · B&H Photo
2150mAh. GoPro lists this pack as fitting the whole MISSION 1 series and the HERO13 Black, so a HERO13 owner moving to a MISSION 1 keeps their spares. The older 1900mAh Enduro (AEBAT-001) fits the same cameras; the Enduro 2 holds more and, GoPro says, charges faster than any previous GoPro battery.
MISSION 1Enduro 2 (AGBAT-001) Preferred (original)
Also supported: Enduro (AEBAT-001) — GoPro-confirmed
Also at: GoPro.com · B&H Photo
2150mAh. GoPro lists this pack as fitting the whole MISSION 1 series and the HERO13 Black, so a HERO13 owner moving to a MISSION 1 keeps their spares. The older 1900mAh Enduro (AEBAT-001) fits the same cameras; the Enduro 2 holds more and, GoPro says, charges faster than any previous GoPro battery.

In some cases, there’s more than one model number that can be used in a particular camera. For instance, some batteries have been tweaked and replaced with newer iterations, along the lines of AHDBT-201 and AHDBT-301. In those cases, I’ve listed the most recent iteration, which is both the newer version and is generally more widely available.

GoPro Battery & Charger Compatibility, Model by Model

Have Camera Will Travel Newsletter

Practical field notes, hands-on gear tests, and the fun of exploring the world with a camera in hand.

I should mention, too, that I’m referring here to the official GoPro model numbers. Aftermarket batteries can also be good value, and they often perform well (but quality and quality control can vary). They nearly always refer to the same official GoPro battery model numbers, so a search for these model numbers should also be useful for finding aftermarket versions.

If you’re new to GoPros, it’s a natural question whether all GoPro batteries are the same. And there’s a simple answer: no, they’re not. You must get the correct model battery for your specific model of GoPro camera.

Many GoPro batteries look similar, but there can be differences in physical dimensions and contact points between camera models. And in recent years, some have used different technology.

So you do need to make sure that you get the right battery for the specific GoPro camera model.

The same goes for external battery chargers. The GoPro Dual Charger for the HERO8 batteries, for example, won’t work with HERO9 batteries. (But the Dual Charger for HERO9 batteries will work with the HERO10 batteries.)

Heads up! The GoPro HERO13 Black uses a new model of the Enduro battery (and charger)

GoPro released the HERO13 Black in September 2024. While it still uses an Enduro battery, it’s an updated version and is NOT compatible with the previous versions used in the HERO9 through HERO12.

The model number of the new version is AEBAT-001. (It’s also sold as a two-pack, in which case the product number is AEBAT-201. AEDBD-201 is a different thing again — the dual charger bundled with two of these batteries.)

GoPro could have made it easier on us and called it something different. Or at least use some kind of naming convention that sets it apart from the previous one. But nope, it’s still called the Enduro. (As is the MAX 2 battery. Grrr.)

It should be explicitly listed as the HERO13 Black model, but not every retailer is that careful or that accurate. So you might need to verify for yourself to make sure it’s the correct one that’s compatible with your camera.

For the HERO13 Black Enduro battery, there are two key things to look for:

  • It should be all black. If it has a white end cap (like the image below on the right), it’s not the right one for the HERO13 Black — the white-capped ones are for the HERO9/10/11/12 models.
  • It’s rated for a capacity of 1900mAh. The older version is rated for 1720mAh.

There is now a second battery that works in the HERO13 Black. The Enduro 2 (AGBAT-001, 2150mAh) came in with the MISSION 1 cameras, and GoPro lists it as an upgrade battery for the HERO13 Black for longer runtimes. So a HERO13 owner shopping for spares has two valid choices — the 1900mAh AEBAT-001 or the 2150mAh Enduro 2 — but still not the 1720mAh version from the HERO9 through HERO12.

HERO13 Black Enduro battery beside the older HERO12/11/10 Enduro battery, showing different connector pins
At left is the new HERO13 Black Enduro battery (AEBAT-001). At right is the older Enduro battery for previous models (ADBAT-011), used in the HERO12/11/10 Black. Photo by David Coleman / Have Camera Will Travel

Important: GoPro MAX 2 vs. original MAX batteries

Just as with the HERO13 Black, the release of the GoPro MAX 2 brings a new battery form factor that is not backward compatible.

The original GoPro MAX (released in 2019) used the ACBAT-001 battery. The new GoPro MAX 2 uses a completely different battery model (AMBAT-001), which carries the “Enduro” branding, indicating better cold-weather performance.

So it’s another instance where GoPro’s product naming system makes things as clear as mud, and it’s not safe to assume that because they are both “Max” cameras that the batteries are swappable. They are physically different, and the older batteries will not fit or function in the new MAX 2. Always check the model number before buying spares.

Which battery your GoPro camera uses

The chart above has the full detail. If you just want the one-line answer for your camera — or want to know which of your other bodies can share spares — here’s the same information grouped by battery. It comes from the same verified data as the chart, so it stays in step as new models are added.

GoPro cameras that use the AABAT-001

4 GoPro cameras in this chart share the AABAT-001, so spares are interchangeable between them. Charger: AADBD-001.

  • GoPro HERO (2018) — AABAT-001 (charger AADBD-001); also takes the AJBAT-001
  • GoPro HERO5 Black — AABAT-001 (charger AADBD-001); also takes the AJBAT-001
  • GoPro HERO6 Black — AABAT-001 (charger AADBD-001); also takes the AJBAT-001
  • GoPro HERO7 Black — AABAT-001 (charger AADBD-001); also takes the AJBAT-001

GoPro cameras that use the AHDBT-301

3 GoPro cameras in this chart share the AHDBT-301, so spares are interchangeable between them. Charger: AHBBP-301.

  • GoPro HERO3 Black — AHDBT-301 (charger AHBBP-301); also takes the AHDBT-302
  • GoPro HERO3 Silver — AHDBT-301 (charger AHBBP-301); also takes the AHDBT-302
  • GoPro HERO3 White — AHDBT-301 (charger AHBBP-301); also takes the AHDBT-302

GoPro cameras that use the Enduro 2 (AGBAT-001)

3 GoPro cameras in this chart share the Enduro 2 (AGBAT-001), so spares are interchangeable between them.

  • GoPro MISSION 1 — Enduro 2 (AGBAT-001); also takes the Enduro (AEBAT-001) — the Enduro 2 (AGBAT-001) is the one to buy for it
  • GoPro MISSION 1 PRO — Enduro 2 (AGBAT-001); also takes the Enduro (AEBAT-001) — the Enduro 2 (AGBAT-001) is the one to buy for it
  • GoPro MISSION 1 PRO ILS — Enduro 2 (AGBAT-001); also takes the Enduro (AEBAT-001) — the Enduro 2 (AGBAT-001) is the one to buy for it

GoPro cameras that use the ADBAT-001

2 GoPro cameras in this chart share the ADBAT-001, so spares are interchangeable between them. Charger: ADDBD-211.

  • GoPro HERO9 Black — ADBAT-001 (charger ADDBD-211); also takes the Enduro (ADBAT-011)
  • GoPro HERO10 Black — ADBAT-001 (charger ADDBD-211); also takes the Enduro (ADBAT-011)

GoPro cameras that use the AHDBT-001

2 GoPro cameras in this chart share the AHDBT-001, so spares are interchangeable between them.

  • GoPro HD HERO — AHDBT-001; also takes the AHDBT-002
  • GoPro HD HERO 960 — AHDBT-001; also takes the AHDBT-002

GoPro cameras that use the AHDBT-302

2 GoPro cameras in this chart share the AHDBT-302, so spares are interchangeable between them. Charger: AHBBP-301.

  • GoPro HERO3+ Black — AHDBT-302 (charger AHBBP-301)
  • GoPro HERO3+ Silver — AHDBT-302 (charger AHBBP-301)

GoPro cameras that use the AHDBT-401

2 GoPro cameras in this chart share the AHDBT-401, so spares are interchangeable between them. Charger: AHBBP-401.

  • GoPro HERO4 Black — AHDBT-401 (charger AHBBP-401)
  • GoPro HERO4 Silver — AHDBT-401 (charger AHBBP-401)

GoPro cameras that use the Enduro (ADBAT-011)

2 GoPro cameras in this chart share the Enduro (ADBAT-011), so spares are interchangeable between them. Charger: ADDBD-211.

  • GoPro HERO11 Black — Enduro (ADBAT-011) (charger ADDBD-211)
  • GoPro HERO12 Black — Enduro (ADBAT-011) (charger ADDBD-211)

GoPro cameras that use the AHDBT-002

One GoPro camera in this chart uses the AHDBT-002.

  • GoPro HD HERO2 — AHDBT-002

GoPro cameras that use the AJBAT-001

One GoPro camera in this chart uses the AJBAT-001. Charger: AJDBD-001.

  • GoPro HERO8 Black — AJBAT-001 (charger AJDBD-001)

GoPro cameras that use the ASBBA-001

One GoPro camera in this chart uses the ASBBA-001. Charger: ASDBC-001.

  • GoPro Fusion — ASBBA-001 (charger ASDBC-001)

GoPro cameras that use the Enduro (ACBAT-011)

One GoPro camera in this chart uses the Enduro (ACBAT-011). Charger: ACDBD-001.

  • GoPro MAX — Enduro (ACBAT-011) (charger ACDBD-001)

GoPro cameras that use the Enduro (AEBAT-001)

One GoPro camera in this chart uses the Enduro (AEBAT-001). Charger: AEDBD-201.

  • GoPro HERO13 Black — Enduro (AEBAT-001) (charger AEDBD-201); also takes the Enduro 2 (AGBAT-001)

GoPro cameras that use the Enduro (AMBAT-001)

One GoPro camera in this chart uses the Enduro (AMBAT-001). Charger: AMDBD-001.

  • GoPro MAX2 — Enduro (AMBAT-001) (charger AMDBD-001)

GoPro cameras with a built-in battery

These have no removable battery, so there is nothing to buy as a spare — you recharge the camera itself (11 models).

  • GoPro HERO (2014) — built-in battery, charged in the camera
  • GoPro HERO (2024) — built-in battery, charged in the camera
  • GoPro HERO+ — built-in battery, charged in the camera
  • GoPro HERO+ LCD — built-in battery, charged in the camera
  • GoPro HERO4 Session — built-in battery, charged in the camera
  • GoPro HERO5 Session — built-in battery, charged in the camera
  • GoPro HERO7 Silver — built-in battery, charged in the camera
  • GoPro HERO7 White — built-in battery, charged in the camera
  • GoPro HERO11 Black Mini — built-in battery, charged in the camera
  • GoPro HERO Session — built-in battery, charged in the camera
  • GoPro LIT HERO — built-in battery, charged in the camera

Things worth knowing about GoPro batteries

I have a separate post that goes into much more detail on the topic of tips for charging your GoPro.

There’s more than one way to charge GoPro batteries. I’ve included the corresponding external battery charger models in the table above, but the batteries can also be charged directly in the camera (with a USB charger cable). The charger models I’ve listed above are the official ones put out by GoPro, but there are many aftermarket external charger cradles that also work well.

All of GoPro’s removable batteries, the Enduro versions included, are rechargeable lithium-ion. The Enduro ones use the same basic chemistry but are built to keep working better in the cold. That’s worth knowing when you fly: spare lithium-ion batteries have to go in your carry-on, not in checked bags.

Some GoPro cameras don’t have removable batteries. They have built-in internal batteries that can’t be replaced. The most recent GoPro models like that are the LIT HERO and the entry-level HERO (2024), followed by the HERO11 Black Mini, HERO7 Silver, and HERO7 White. The same is true for all Session models and some of the older models.

Aftermarket batteries by third-party manufacturers can often be very good options. Many of them perform well, and they can provide much better value than the official GoPro-branded ones. But quality control can vary with some of the no-name brands. And it is at least theoretically possible for GoPro to cut off compatibility with aftermarket batteries with camera firmware updates. They’ve actually done that once — back with the HERO5 — but it’s not something that camera manufacturers do often.

In some cases, there can be more than one type of battery that’s compatible with the camera (I’m referring here to differently performing batteries, not the smaller model number tweaks I refer to above). So far, that affects the HERO9 Black, HERO10 Black, HERO11 Black, and HERO12 Black, and now the HERO13 Black, which takes either its own 1900mAh Enduro or the newer 2150mAh Enduro 2. All of those will work with the latest Enduro batteries, but the earlier models in that list come with the Standard battery (with the HERO12 Black and HERO11 Black, the Enduro is the recommended battery to use).

Related: not sure which accessories are worth it or which ones fit your model? See my GoPro accessories guide.

Enjoyed this article? Personalize your search results.
Add as Preferred Source
David Coleman

Text & photos by David Coleman

I'm a freelance travel photographer based in Washington DC. Seven continents, up mountains, underwater, and a bunch of places in between. My images have appeared in numerous publications, and you can check out some of my travel photography here.

I've been shooting with GoPros for years, starting with the HD HERO, and have owned and used just about every model since. More »

Conversation

  1. I have a hero8 blackand need to keep taking the battery out, and reinserting it, every time I want to make a recording! GoPro support are telling me that because I have used both GoPro and compatible batteries, this has caused a power issue with the camera. I think it is BS. In addition, they advise that because I am an occasional user (twice a year while mountain trekking), this has shortened the battery life. Would love to have your input please.

    Reply
    • Hi Derek. I’ve never heard of that suggestion before, and it frankly doesn’t make a lot of sense to me. And I’m not following whether they think it’s a problem with the camera or the battery or both. I’ve also been mixing and matching GoPro and aftermarket batteries for years without any issue.

      I guess the most obvious thing to test first would be a new battery. But there are a couple of things you can try before spending any money:

      – Check that the firmware is up to date. While I can’t think of a specific firmware update that would address an issue like this, it’s definitely worth doing. And they often sneak in some unannounced fixes in firmware updates under the “bug fixes and improvements” umbrella.
      – If you’re not using the camera often, it’s possible the power contacts are getting slightly corroded in between uses. That might explain why removing and reinserting it is having an effect–just the act of reinserting it might be just scraping off that tiny amount of corrosion each time and giving it a clean connection. The right way to do it is with some isopropyl and a cotton swab both on the battery’s contacts and on the camera’s contacts (harder to reach). But in a pinch, even some careful light scraping can help in the field.

      Reply
  2. Hey,

    I have bought a battery for my GoPro 5 Black, bug it came a battery of GoPro 8 (with Blue plastic). It fills perfectly in my GoPro5 but it doesn t work. I Don’t know why. I have replaced a 2nd time with another battery bit still have the same issue. In your table, it s the same reference. So, do you have and idea of what s going on? thx

    Reply

Leave a Comment